The Borescope kit is a desktop solution for the support of probes. It allows the inspection of Main Gear Box, Tail Gear Box, Intermediate Gear Box, Engine and Horizontal Stabiliser. This system works with a probe with a high-precision optics. This sensor is equipped with a high-performance CCD sensor to provide video and photos to perfectly visualize inspection details. Its outputs enable it to be connected to any Visio P2 probe, regardless of its length, diameter or optics.
– Weighing platform: position of the load on the scales in the dead zone. Robust, easy to use, manoeuvrable. Measurement signal output via quick waterproof connection.
– VPR MVN Weighing electronics case: Helicopter weighing electronics wheel by wheel weighing.
Functions: zero/gross/tare/net. Summation of selected paths. Total gross and net weight 230V AC or 12V DC power supply RS232/485 output to PC or printer.
The Model 6200 is used to perform leak-checks and accuracy checks on the Pitot Static systems of helicopters & non-RVSM aircraft. The 6200 is WiFi-enabled. Accuracy checks are typically performed on altimeters, airspeed indicators and VSI’s. The high accuracy of the Pitot output is ideally suited for checks at low airspeeds.
The ADTS542F9063, supplied with an ADTS Touch, is a small, lightweight and cost-effective portable two-channel flightline pitot static tester for “Aircraft on the Ramp” testing.
The ADTS542F9063 is also ideal for any aircraft with low pitot static demands or for light aircraft, including helicopters and propeller-driven airplanes.
This self-contained, battery-powered packages contain a pressure generator, fine pressure control, device energizing (not IS version), and output measurement capabilities as well as facilities for 4-20mA loop testing and data storage. Featuring highly reliable pneumatic and hydraulic assemblies and self-test routines, the DPI/610 Series of pressure calibrators can be relied upon time and time again for field calibration
in the most extreme conditions.
This tool provides an immediate digital reading of all angles in a 360º range (between +45° and -45°C / 113° and -49°F).
The unit utilizes a patented, liquid-filled sensor combined with precision measurement circuitry to provide unparalleled accuracy and stability.
Specifically designed for starting and maintaining helicopters, this generator is a powerhouse at very low cost: the charged batteries add their capacity to the diesel motor-generator in order to ensure the peak currents necessary for aircraft start-up. The dual voltage alternator allows it to simultaneously provide:
• an alternating current (AC) of 115 VAC/400 Hz required by the on-board electronics during
flight preparation
• a direct voltage of 28 VDC for helicopter maintenance operations and start-up
KA2016 The Portable Starter Power Supply 40Ah (PSPS)
Ref: KA2016 / NSN: 2995-14-586-6161
A breakthrough for Ground Power Unit users, the PSPS can start aircraft engines whenever and wherever. It also comes in handy during maintenance tasks to provide abundant auxiliary power for avionics, on-board medical equipment, or any other accessory. Its self-monitoring features give you access to pertinent information such as battery health and state-of-charge through a LCD display.
This complete case, designed in collaboration with the technicians of Airbus Helicopters and specifically for the Super Puma, offers a comprehensive set of tools for an electrician.
